a: The number and total number of batteries required are calculated according to the selected standard according to our own requirements.
b: The safety selection criteria are the Storage Battery manufacturers of certain well-known brands derived from the safety standards, and dealers, regional agents with technical performance and good service are selected.
c: The standard of high cost performance is based on the quality of the product. The service life of some batteries is only two years, and the service life of some batteries is only ten years, and the most suitable batteries.
Storage Battery volume measurement
The volume of the Storage Battery must be the volume of the load shown at the set working voltage and set time.
Batteries with deep discharge are usually used in ampere-hours (Ah), representing the amount of current (20-hour) rate that can be displayed in unit time (usually 20 hours).
A simple way to determine Storage Battery volume based on lighting usage is to multiply the Storage Battery's usage time between charges by its power output. The enterprise that gets the result is the tile time, which is divided by its rated current and can be changed to the safe time. According to these conditions, the Storage Battery discharge, the general Storage Battery charging and discharging ideal situation is 50%, should consider choosing the Storage Battery. The higher the Storage Battery power consumption, the stronger the power supply system, and the lower the probability of Storage Battery overcharging and discharging.
