1. The electrode plate of the Storage Battery should be immersed in the electrolyte of the lithium Storage Battery. When the electrode plate is exposed to a distance of 10 cm above the surface of the electrolyte of the lithium Storage Battery, the electrolyte of the lithium Storage Battery should be filled according to the following conditions: When the electrolyte density of the lithium Storage Battery exceeds 15c, pure water should be added; When the electrolyte density of the lithium Storage Battery is less than 15c, the electrolyte of the lithium Storage Battery should be added. The electrolyte of the lithium Storage Battery should not be filled at the end of charging or discharging but before charging.
2. The voltage of each Storage Battery in the floating charge state shall be maintained in the Storage Battery, and shall be maintained in the following categories.
3. The bus voltage of the DC system should be kept within the rated current range of 5%.
4. The electrolyte temperature of the Storage Battery should be kept at 15-40℃ and the low temperature should be between 10℃.
5. The electrolyte density of the Storage Battery is soil. The lithium Storage Battery electrolyte density should be increased or decreased by 1c. The lithium Storage Battery electrolyte density should be decreased or increased by the sum of the DC network load current and the Storage Battery pack charging current. If a floating Storage Battery charger device is available under all normal conditions, the Storage Battery shall be operated by flotation method.
7. Lithium ion Storage Battery electrolytes should be subject to annual technical inspection, and for those who have conflicts, technical solutions are needed.
8. Always keep the Storage Battery clean, and always check the bottle inlet and outlet holes to ensure that the room is well ventilated and well-ventilated.
