The most important characteristics of the colloid battery are as follows:
The internal structure of the colloidal battery is mainly SiO2 porous network structure, there are many small gaps, can successfully convert the oxygen in the battery from the negative electrode film to the negative electrode film, close.
Colloidal batteries require a large amount of acid, so their volume is essentially the same as that of AGM batteries.
The internal resistance of colloidal battery is very large, and it does not have good high current discharge characteristics.
Heat dispersion, not easy to warm up, can not control the probability of heat is not big;
The battery should be installed in accordance with the requirements of the installation device. The foot should be used to keep the battery rack level.
Pavement or switching power cabinets equipped with batteries shall have sufficient carrying capacity.
Rechargeable battery connection
Before installation, check all single and rechargeable batteries to see if damage is mandatory and ensure rotation accuracy.
Put the connector down.
Connect the lithium battery pack to the charging head according to the appropriate optical rotation. The charging head must be cut off throughout the process and cannot be connected to the load (positive column).
When loading and unloading conducting lines, use special tools with insulated straps to install or transport rechargeable batteries with insulated gloves, hood and goggles. Rechargeable batteries avoid shock, do not vibrate end posts and safety automatic exhaust valves. Do not place special tools, dirt or other conductive materials on rechargeable batteries.
Line terminal lines or non-solid connection stains can cause rechargeable batteries to ignite, so maintaining terminal lines in cleaned connections and twisting special types of connection cables to a specified torsional distance does not cause ground stress distortion at terminal lines.
